The finest materials are used to make the POLYWAX DENTURE WAX. The wax. It is perfect for general use for technicians who are looking for easy shaping, carving, modelling properties.
test
The POLYWAX WAX WIRE is the best wax money can buy. We responded to the wish fo many technicians who were looking for a harder and more economic wax wire and so developed Polywax Roll. BILKIM uses a special method and special micro-molecular wax the production of this wax . The process yields a wax wire with great internal stability.
Parmax Original Preparation diamond
Intended use: Crown preparation and cavity preparation
Grain size: Coarse, black ring
Parmax Metal Posts are based on the shape of the classic root shaped threaded posts. This is an economical alternativ for a permanent solution. Available in assortments and refills.
Parmax Metal Posts are based on the shape of the classic root shaped threaded posts. This is an economical alternativ for a permanent solution. Available in assortments and refills.
Available in sizes XS-XL
5705 (X-Small)
5706 (Small)
5707 (Medium)
5708 (Large)
5709 (X-Large)
Available in sizes XS-XL
3385 (X-Small)
3386 (Small)
3387 (Medium)
3388 (Large)
3389 (X-Large) *250 gloves/box
Available in sizes Small
The No.12 is a small, pointed, crescent shaped blade sharpened along the inside edge of the curve. It is sometimes utilised as a suture cutter but also for arteriotomies (surgical incision of an artery)
Fitment No.3. Fits Handles 3, 3L, 3 Graduated, 5B, 7, 9, B3 and B3L.
With a longer, more extended cutting edge than the traditional No.15 blade, the 15C provides additional reach for the Dentist carrying out Periodontal procedures especially when combined with the ergonomically designed B3 handle.
The short rounded cutting edge combined with an angled point provide additional strength to this blade making it ideal for fine procedures in the hand and foot such as debridement
Stainless Steel Handles with a measure or graduation on the reverse side to assist with training, marking of the correct surgical site and trauma injury investigations.
A No. 5 bulbous Stainless Steel handle. Fits Blades – including No.6, 9, 10, 10A, 10R, 11, E/11, 11P, 12, 12D, 13, 14, 15, 15A, 15C, D/15, 15T, 16, 40 and SG3.
The slim elongated Stainless Steel No.7 Handle is individually wrapped and boxed in units of 10. Fitment No.3 Fits Blades – No.6, 9, 10, 10A, 10R, E/11, 11, 11P, 12, 12D, 13, 14, 15, 15A, 15C, 15T, 16, 40 and SG3.
The short slim No.9 Stainless Steel handle is individually wrapped and boxed in units of 10.Fitment No.3. Fits Blades – No.6, 9, 10, 10A, 10R, E/11, 11, 11P, 12, 12D, 13, 14, 15, 15A, 15C, 15T, 16, 40 and SG3.
Stitch Cutters are often used within GP Practice, Care homes or during Domiciliary visits so it is essential that an exposed sharp is not left around after use as there may well be other parties such as children, residents or even a household pet within the immediate vicinity.
Swann-Morton sterile disposable scalpels, sealed individually in trays and boxed in units of 10, are fitted with the following blades: 6, 9, 10, 10A, 11, E/11, 11P, 12, 12D, 14, 15, 15A, 15C, 15T, 16, 18, 19, 20, 21, 22, 22A, 23, 24 and 36
Optimal adhesion and removability
Thin film thickness
Automatic mixing and direct application
MEISINGER launched a new instrument kit for the laboratory in cooperation with international renowned dental technician Klaus Müterthies. The Psychedelic Kit offers the user a custom-fit selection of instruments for zirconia and CAD/CAM restorations.
Occlusal reduction diamonds are already an integral part of the MEISINGER product portfolio. Thanks to their unique angled depth stop, the special instruments allow precise occlusal reductions.
The new Zircon Cut instruments from MEISINGER facilitate the cutting of zirconia crowns and ceramic restorations thanks to their solid workmanship. In order to determine the exact cutting depth in advance, the diamond saws are available with preparation depths of 1.7 mm, 2.2 mm as well as 2.3 mm.
The polishers 9517H, 9517P, 9517V are especially suitable for the intraoral polishing of non-precious metals, precious metals and amalgam.
The Meisinger SINGLES are intended for single use and offer the perfect solution for maximum efficiency and hygiene.
Both kits contain perfectly coordinated coarse and fine diamond burs to create a smooth restoration margin and and efficient workflow. The DB01 Kit includes depth reduction burs to reduce the facial of anterior teeth uniformly for aesthetic restorations.
he drills are available in 1.5 mm, 1.8 mm, 2.0 mm, 2.2 mm and 2.4 mm lengths, each corresponding to specific restoration materials.A drill for labial reduction of 1.0 mm in length is also available.
The MEISINGER Diamond Discs are suitable for precise partition and separation. The comprehensive assortment contains the right discs for every material ranging from plastic, ceramic, zirconium oxide and plaster.
The QX-Tungsten Carbide Cutter enables an effective treatment of thermoplastic materials. Thanks to its x-cut toothing and large chip spaces, material can be removed very efficiently without sticking the cutting edges due to high frictional heat.
MEISINGER’s Twist Finishers are very good for working with composites and other filling materials, due to their precise twist angle
The MX Tungsten Carbide Cutters are used for the treatment of non-precious metals and model casting alloys. The special toothing and extremely resistant material allow for efficient material removal and a long product life.
These MEISINGER grinding tools are especially designed for precise adjusting and easy processing of Zirconia restorations. The special bonding ensures very low heat generation and significantly reduces the risk of micro-fissures.
The CAD/CAM Prep Kit contains an ideal selection of awardwinning diamonds including all the necessary shapes for inlays, onlays and full coverage crowns.
the kit provides all of the necessary tools to produce excellent results for both anterior and posterior crowns. This kit contains diamonds and abrasives for sprue removal, contouring and adjusting anatomy.
Prophylaxis system
The perfect combination for all prophylaxis steps
Reliable protection due to xylitol and fluoride
3 flavors for combination
Treatment of hypersensitive teeth, sealing of dentine tubules after cavity preparations, sealing of hypersensitive cervixes and exposed root dentine
Desensitizes reliably,
Contains xylitol and fluoride,
Invisible on teeth,
2 fresh flavors: Mint and Melon
Removal of superficial soft and hard plaque, removal of extrinsic stains
For a perfect cleaning and polishing effect,
Does not splatter,
3 different grits,
2 fresh flavors: Mint and Melon,
Contains xylitol and fluoride,
Silicone protection for relative drying of the proximal area between two teeth and protection of the gums against dental materials
Reliable local protection of the proximal area,
Quick and easy,
Comfortable for patients,
The innovative method to arrest caries:
Helps arrest caries progression in the early stages.
Immediate correction of initial lesions upon diagnostic assessment, no more waiting until a restorative therapy becomes necessary
Gentle method without anesthesia or drilling
Tooth friendly filling by infiltration – no drilling needed,
Gentle therapy approach for difficult-toreach proximal lesions in just a few steps,
No unnecessary loss of healthy hard tissue,
Prolongs the life expectancy of the tooth,
Gentle method for counteracting cariogenic white spots – with an esthetic side effect,
No unnecessary loss of healthy hard tissue,
User-friendly and patient-friendly application process in only one sitting,
Pourable after 10 minutes
Very high dimensional stability
Very long shelf life
Repourable
No time-consuming hand-mixing
Excellent recovery after deformation
Fluid during and stable after the application
Luer-Lock tips for exact applications
Excellent polishability, natural esthetics
Radio-opaque
No mixing
No tray required
Stable under storage conditions
No smear layer on bisacryl temporaries
Odorless
Natural fluorescence in six shades
Low polymerization shrinkage
High fracture and abrasion resistance
Outstanding color stability
Low allergy potential
Suited for long-term temporaries
Perfect precision fit
High flexural strength and abrasion resistance
Excellent biocompatibility
Available in five shades
Substantially higher flexural strength and fracture toughness
Improved initial hardness
Great adaption and fit
Outstanding esthetics and color stability
Faster curing
High biocompatibility
Suited for long term temporaries
High gloss shine without polishing
Excellent bond with repair materials
Extraordinary abrasion resistance
Low surface roughness
Setting time can be user-determined
Easier removal of the temporary during the extended elastic phase, undercuts do not tear
High final hardness immediately after light-cure
Especially suited for multi-unit restorations
Invisible under restorations, yet detectable for excess removal
Beautiful esthetics thanks to optimal transparency
Easy one-piece removal of excess
Optimal adhesion with easy removability
Eugenol free
Excellent ease of use, no sticking to instruments
Flows and mixes easily
Perfect for long-lasting restorations
Optimal adhesion and removability
Thin film thickness
Automatic mixing and direct application
Cuts like dentine
Extremely high compressive strength
excellent flow properties
Reliable curing
One material for building up and cementing
Perfect partner for LuxaCore: Monoblock
Dentine-like flexural modulus: reduced risk of root fracture
Radiopaque
Pre-silanized
Gentle on the tooth substance thanks to tapered form
One powerful drill for each size: No pre-drilling required
Highly esthetic
Self-curing
Universal use
Also suitable for all-ceramic works
Combines the advantages of glass ionomer and composite
Continuous fluoride release
Insoluble in a wet environment
Low film thickness for perfect fit
Radio-opaque
Outstandingly strong adhesive to zirconia, silicate and oxide ceramics
Secure adhesion to metals and composites, too
Time-saving application
Extraordinary flow under pressure
Easiest excess removal
Strong adhesion in all clinical settings
Universal use – versatile with silicate and oxide ceramics, as well as with metals and composites
Clinically established for use with all standard CAD/CAM materials
High abrasion resistance for reliably good marginal quality and longevity of the restoration
Easy, stress-free removal of excess material in one piece
First-class esthetics in 5 shades with matching try-in pastes
Superior materials provide a complete system for veneer cementation
Outstanding shade reproduction and shade selection
Exact shade match between try-in and cement
Particularly easy clean-up
High color stability
Comprehensively illustrated user guide included
Additional utilization support and practical services, such as video tutorials, photo course and expert hotline
Self-etching and self-adhesive
Faster, easier and more efficient treatment process
Radiopacity and tooth-like fluorescence
Prevents postoperative sensitivities
Minimizes potential sources of mistakes
Natural surface shine without protective varnish
Extended indication: Temporary class III
Easy to use, no drying necessary
Reduced caries progression due to fluoride release
Self-adhesive
Excellent biocompatibility
Reduced risk of postoperative sensitivities
Suitable for atraumatic restorative treatment (ART)
Intuitive and straightforward shade concept
Exceptional handling for maximum safety and precision
98 % of all typical treatments with just one material
Restoration system for all cavity classes
Optimal shade selection based on VITA®
Lasting esthetics Wide range of materials
Convincing handling features
Excellent sculpting properties
High viscosity, packable
Excellent handling
Does not stick to the instrument
Good adaptation to cavity walls
Excellent stability
Natural fluorescence
Great variety of shades
Excellent sculpting properties
Medium viscosity
Single and multi-color layer technique
Natural fluorescence
Excellent polishing properties
DMG patented technology
Non-gamma-2 amalgam in self-activating predosed pillows
Unique compensation for composite polymerization shrinkage stress
Fluoride release
Antibacterial properties
No complicated handmixing
Protects the pulp
Seals the dentine tubules
Prevents postoperative sensitivities
Radio-opaque
Optic Led Control
Compact Micro motor 40,000 rpm
9 memory programs can be stored on single motor
Light & compact Optic motor for speedy and accurate surgery
Speed: 150 – 600 rpm
Weight: 310g
Dimensions: W100 x D100 X H228(mm)
Contents: Endo motor, Contra Angle, Charger
Dimensions: L95 X 20(mm)
Weight: 95g
Speed: Max 2000 rpm
Torque: Max 90Ncm
Dimensions: L110 x 20(mm)
Weight: 74g
Speed: max 40000 rpm
Kills 101 microorganisms
Active in 60 seconds
Compatible with more than 250 materials including artificial leather
Low alcohol content of less than 50%
Gentle lemon fragrance
Kills 101 microorganisms
Active in 60 seconds
Compatible with more than 250 materials including artificial leather
Contains less than 50% alcohol
Leaves no residues or smearing
Complies with European standards
Kills 101 microorganisms
Fully virucidal within 30 seconds
Broad effective spectrum
Contains corrosion inhibitors
Excellent cleaning power
Non-foaming formula
Application concentration of 2%
Maximum cost-effectiveness
Simple application
Complies with European standards
Ready-to-use, alcohol based impression disinfectants that is active against bacteria, mycobacteria and enveloped viruses such as HIV or Hepatitis B.
Broad spectrum hand disinfectant gel with moisturizers, vitamins, and anti-aging substances.
Material: Titanium Ti-6Al-4V-ELI
System: Internal Hexagon
Platform: Ø 3.5 mm
Recommended Torque – 30 Ncm
The Impression Transfer indicates the position of an implant relatively to the teeth and jaw structure.
It is made of Stainless Steel and it is compatible with the Alef implant and other internal hexagon implants.
Exceptional image quality
The lightest device, weighing 62kg
Face to Face positioning
Designed to last
High definition image
Sturdy cable
Atraumatic
Direct usb connectivity
High definition image
Straightforward
Atraumatic
Accessible
The AC & DC Owandy-RX have been designed to withstand all kinds of demands and stresses. They are also fitted with a system to guarantee their stability.
– Eliminates vibrations
– Eliminates interfering movements
Dent-a-cav is a temporary close-up material, which is delivered as a ready to use paste, in white or pink. Dent-a-cav adheres to enamel and dentin, shows a very good marginal fit and can be easily removed with a probe
Competence universal is a light-cure micro-hybrid composite for restorations of all cavity classes. Competence universal is very agreeable to handle because it does not stick to the instruments and at the same time adapts very well to the cavity walls.
Enersyl paste is easy to use with both putty and body silicones without wasting material, and allows the achievement of a homogeneous final mix thanks to a perfect control due to the chromatic contrast.
Silaxil condensation silicones (type C), with the highest level of accuracy in details reproduction, are suitable for all impression taking techniques.
The purple color of the light body and the green color of the regular body allow to verify the perfect homogeneity of the mixing between base paste and catalyst, subsequently creating an excellent chromatic contrast between the first and second impression.
Since Kromopan was created it has been an incredible break through in dentistry, allowing, thanks to the chromatic phase indicator (purple: mixing -> pink: tray loading -> white: insertion in mouth),
Kromoglass2 is a water based glass ionomer cement developed for filling.
It is used for restoration of deciduous teeth (especially class I), repairing cuneiform defects, erosions of enamel and roots near the neck, including class V alterations, cavities with carious lesions, class II fillings and class I alterations; including fillings of fissures (wide cracks).
Chromatic type 4 extra hard stone (pastel yellow -> pink -> pastel yellow) with extra fine granulometry specific for the preparation of total and partial non-removable master models, stumps preparation, metal framework, implants and antagonist models.
New generation alginate specific for high precision impressions, with a detail reproduction of 15µm, it can be considered a superior category material. The strawberry aroma makes it particularly pleasant in the mouth.
Liquid for root canal rinsing. Removal of dead pulp residues during mechanical preparation of the root canal. It cleans the canal and removes the smear layer to expose the dentin root canal orifices before final filling.
During the mechanical canal widening it removes the remains of dead pulp. It cleans the canal and removes the smear layer to expose the dentin root canal orifices before final filling.
precise blade for cutting smooth and jagged holes
a five-step scale for dimensioning openings
rotating dial
The punch is made of corrosion-resistant stainless steel.
Clamps to stabilize RUBBER-DAM cofferdam in the mouth
The clamps is made of corrosion-resistant stainless steel.
RUBBER-DAM Template enables easy hole making for teeth in dental rubber dam.
Forceps for clamps with a blocking degree of opening
The forceps is made of corrosion-resistant stainless steel.
The product is intended for dental treatment as a material for filling and remineralisation of root canals. The compound cures in 6 to 10 minutes after mixing with water. The high content of calcium ions remineralises the tooth tissue.
Reusable dental tool for handling and application of prepared measure of MTA+ material.
The tool is made of corrosive – resistant stainless steel.
0,8 mm (diameter)
1,2 mm (diameter)
The product is intended for dental treatment as a material for filling and remineralisation of root canals. When mixed with the BIO MTA+ liquid, the working life is ca. 4 min, and the compound sets completely in ca. 2 h.
The high content of calcium ions remineralises the tooth tissue.
Dosing Block MTA+
MTA+ dosing block is designated for forming precise doses of MTA+ product which is ready for application into the tooth cavity or root canal.
CALCIPAST is intended for use in dental treatment for temporary root canal filling.
Additionally, CALCIPAST may be used for temporary filling of deep cavities during indirect or direct pulp capping.
ENDO-SOLUTION is intended for mechanical root canal preparation. The product facilitates preparation and cleaning of the canal, removes the smear layer and exposes dentin tubule orifices.
Bottle contains 50 ml
Bottle contains 120 ml
Bottle contains 200 g
ENDO-PREP GEL is intended for chemo-mechanical root canal preparation. EDTA in the product helps to remove calcium salts and pulp from decalcified root canals, allowing faster cleaning and shaping the canals.
syringe of 2 ml
syringe of 5 ml
syringe of 10 ml
EUGENOL is used as a liquid for making pastes for root canal filling and temporary filling of cavities. It is mainly used with zinc oxide.
Bottle with dropper of 10 ml
Bottle with dropper of 20 ml
ZINC OXIDE is recommended for making pastes, mainly with EUGENOL, used for temporary filling of cavities and root canals. Mixture of zinc oxide with eugenol as a temporary filling has drying effect and stimulates creation of the secondary dentine.
container of 50 g, spoon
ORANGE GUTTANE is intended for use during endodontic re-treatment to remove gutta-percha from the root canal
The product is intended for dental treatment as a material for filling and sealing root canals.
The material is used as a permanent filling of the root canals of permanent teeth using canal pins, including gutta-percha points.
The preparation is used during endodontic treatment for rinsing root canals. It improves mechanical cleaning of the root canal.
GLUCOSITE is intended for use during dental treatment, by the dentist, for rinsing the gingival pockets and other difficult to be reached areas of mucosa membrane of the oral cavity in purpose of washing and cleaning them
ALUSTAT is intended for use during dental treatment to staunch slight gingival bleedings.
Aluminium chloride in the product has the vasoconstrictive effect on tiny blood vessels, as a result of which the gingival swelling and slight bleedings decrease.
ALUSTAT GEL is intended for use during dental treatment to staunch slight gingival bleedings.
Aluminium chloride in the product has the vasoconstrictive effect on tiny blood vessels, as a result of which the gingival swelling and slight bleedings decrease.
ALUSTAT FOAM is intended for use during dental treatment to staunch slight gingival bleedings.
Aluminium chloride in the product has the vasoconstrictive effect on tiny blood vessels, as a result of which the gingival swelling and slight bleedings decrease.
EUCALYPTOL is intended for use during repeated endodontic treatments to remove gutta-percha from the root canal
RUBBER-DAM Napkins – to absorb moisture and protect sensitive skin
against contact with dental rubber dam.
Napkins are designed to absorb moisture and protect sensitive skin from the contact with dental rubber dam.
Protective enamel with fluoride for children.
Fluor Defender mini: 3 x 1 ml of preparation + set of disposable brush applicators
Fluor Defender maxi: 10 x 1 ml of preparation + set of disposable brush applicators
Dental etchant
BLUE ETCH product is used for etching dentine and enamel prior to composites, fissures and cavity seals.
MEGA PACK- 3 x 10 ml + dispenser + connector + set of applicators
YELLOW PORCELAIN ETCH is used for porcelain etching during reparation of the dentures, as well as for the etching porcelain vaneers, crowns and inlays before their cementation.
syringe of 2ml Yellow Porcelain Etch
YELLOW PORCELAIN ETCH is used for porcelain etching during reparation of the dentures, as well as for the etching porcelain vaneers, crowns and inlays before their cementation.
Trichloroacetic acid is used to cauterise local pathological changes and minor bleeding in the oral cavity. The healing effect of this preparation is achieved by chemical coagulation of pathologically altered tissue
RED DETECTOR is intended for locating caries lesions.
Red dye in the product permeates the tissue with caries lesions and dyes it red. RED DEECTOR increases safety of work by locating the carious dentine and saving the healthy tissues.
Light-cured RUBBER-DAM LIQUID is dedicated for:
gingiva protection during dental treatments: whitening, etching, microabrasion, sandblasting etc.
sealing rubberdam.
Retraction cord impregnated with Aluminum Chloride Hexahydrate. Used for the retraction of gingival tissues around tooth to improve impression results and gingival edge haemostasis.
Polymerization spectacles are designed mainly for dentists, dental technicians,
medical assistants, patients for protection against the polymerization lamp light.
Protective shields for a patient prevent injuries of an eye and eye area that could happen as a result of dental procedures.
KIDS SHIELD – Mask for mouth and nose for kids.
Protection against particles in low risk enviornment.
Antistatic (does not attract dust particles and developed materials).
Universal shield.
Perfect protection and comfort during work for every user.
Extremely light.
High breaking resistance of the foils.
Foil washable.
Featuring a micro-processor-controlled hand piece for instantaneous frequency adjustment, a cordless, programmable Bluetooth footswitch, and a variable, modulated driving signal for precise and instantaneous power adjustment, the ARTeotomy™ OP1 is a huge leap forward.
Bipolar converter for ART-Electron™ (E1). Permits the usage of bipolar prongs and handpieces. Bipolar prongs and handpiece not included.
Blue Electrodes for ART-Electron™ (E1) and Compatible Units
full set of seven (7) blue electrodes.
Shaft diameter: 1/16”
for dentists, oral surgeons and veterinarians alike, electrosurgery units have become a staple in the operatory for their fast cutting, ease of use, and track record of safe implementation
Return Electrode (Grounding Plate) for ART-Electron™ (E1)
Comes with the ART-Electron™ (E1) and sold separately.
– Permanent obturation of root canals in combination with obturation points
– Lubricant & sealing of GP point
– Adhesion agent between GP and root canal wall
EsBond is 5th generation bonding agent that designed to bond all classes of direct composite restorations to dentin, enamel, as well as composite, treated porcelain and set amalgam.
Temp.it Flow is a light-curing elastic material for temporary restorations in flowable type.
– Bio-compatible polymeric materials contained
– Complete residue-free after water-spray
– Excellent viscosity
– Effectively removes smear layers and creates the ideal bonding surfaces on dentin, enamel and dental posts.
– Excellent flowability
– High holding power with high physical strength
– Low polymerization shrinkage minimizing the stress and reducing microleakage
– Low wear resistance
EsTemp Implant is non-eugenol, dual-cured temporary resin cement for luting implant-retained crowns.
Fine Dam is a light-curing resin barrier for isolating tissue adjacent to teeth being bleached.
VioPaste® consists of Calcium Hydroxide. It is a temporary root canal filling material. It has strong bactericidal effect in root canal.
EsCom100® is a light-cured restorative Nano-Hybrid composite resin for posterior and anterior restorations.
Base.it is light curing base liner containing Calcium hydroxyapatite in Urethan methacrylate oligomer.
Fuji I is ideal for the luting of all kinds of metal-based and opaque Zirconia restorations and posts. It is an excellent option as well for cementation on implant abutments.
Bausch 200µ Articulating Paper with progressive color transfer can highlight any existing masticatory pressure interference clearly. Thinner test products which are available in thicknesses of up to 8µ (Arti-Fol®) should be used after adjusting and localizing the problem area.
Bausch 200µ Articulating Paper with progressive color transfer can highlight any existing masticatory pressure interference clearly. Thinner test products which are available in thicknesses of up to 8µ (Arti-Fol®) should be used after adjusting and localizing the problem area.
Bausch 200µ Articulating Paper with progressive color transfer can highlight any existing masticatory pressure interference clearly. Thinner test products which are available in thicknesses of up to 8µ (Arti-Fol®) should be used after adjusting and localizing the problem area.
Bausch 200µ Articulating Paper with progressive color transfer can highlight any existing masticatory pressure interference clearly. Thinner test products which are available in thicknesses of up to 8µ (Arti-Fol®) should be used after adjusting and localizing the problem area.
This smooth fiber reinforced paper with high coloring capacity adapts perfectly to the occlusal surfaces. The occlusal contact points or centric contacts are marked very precisely because of the paper’s progressive color transfer.
This smooth fiber reinforced paper with high coloring capacity adapts perfectly to the occlusal surfaces. The occlusal contact points or centric contacts are marked very precisely because of the paper’s progressive color transfer.
This smooth fiber reinforced paper with high coloring capacity adapts perfectly to the occlusal surfaces. The occlusal contact points or centric contacts are marked very precisely because of the paper’s progressive color transfer.
Bausch 40µ micro-thin Articulating Papers are extremely thin and tear resistant and are coated with liquid colors on both sides. These papers mark precisely because of the thin material; false or smear contacts can thus be avoided.
Bausch 40µ micro-thin Articulating Papers are extremely thin and tear resistant and are coated with liquid colors on both sides. These papers mark precisely because of the thin material; false or smear contacts can thus be avoided.
Bausch 40µ micro-thin Articulating Papers are extremely thin and tear resistant and are coated with liquid colors on both sides. These papers mark precisely because of the thin material; false or smear contacts can thus be avoided.
Bausch 40µ micro-thin Articulating Papers are extremely thin and tear resistant and are coated with liquid colors on both sides. These papers mark precisely because of the thin material; false or smear contacts can thus be avoided.
Bausch 40µ micro-thin Articulating Papers are extremely thin and tear resistant and are coated with liquid colors on both sides. These papers mark precisely because of the thin material; false or smear contacts can thus be avoided.
g. The test material is subject to stringent requirements because of the occlusal proportions. The occlusal contacts often have a very small diameter which is scarcely discernible on highly polished ceramic or metal surfaces.
This film possesses excellent color transfer. High spots can easily be detected, especially on ceramic or highly polished metal surfaces.
This film possesses excellent color transfer. High spots can easily be detected, especially on ceramic or highly polished metal surfaces.
This film possesses excellent color transfer. High spots can easily be detected, especially on ceramic or highly polished metal surfaces.
8 mm wide,
10 m long
8 mm wide,
95 mm long
100 pcs.
8 mm wide,
95 mm long
100 pcs.
• white (thin, short) – 50 pcs.
• yellow (thin, long) – 50 pcs.
• blue (medium, short)- 50 pcs.
• pink (medium, long) – 50 pcs.
(orange)
100 pcs.
(white)
100 pcs.
(green)
100 pcs.
(yellow)
100 pcs.
(blue)
100 pcs.
(pink)
100 pcs.
(violet)
100 pcs.
small
(for saddle matrices)
1 pc.
(for Pony matrices)
1 pc.
(with screw thread for connection with standard mirror handle)
1 pc.
small № 1.311(1) – 6 pcs.,
medium № 1.312(1) – 6 pcs.,
large № 1.313(1) – 6 pcs.,
small springclip № 1.003 – 1 pc.
Matrices are available of two thicknesses – 0,050 mm and 0,035 mm.
12 pcs.
There are matrices of 3 shapes:
shape 1 – standard,
shape 2 – with adjustable central part,
shape 3 – with enlarged sub-gingival ledge.
36 pcs.:
small № 1.301(1) – 3 pcs.,
medium № 1.302(1) – 3 pcs.,
large № 1.303(1) – 3 pcs.,
small № 1.311(1) – 6 pcs.,
medium № 1.312(1) – 6 pcs.,
large № 1.313(1) – 6 pcs.,
small № 1.311(2) – 2 pcs.,
medium № 1.312(2) – 2 pcs.,
large № 1.313(2) – 2 pcs.,
small № 1.311(3) – 1 pcs.,
medium № 1.312(3) – 1 pcs.,
large № 1.313(3) – 1 pcs.,
small springclip № 1.003 – 1 pc.
shape 1
(small with ledge)
12 pcs.
holder with key – 1 pc.
handle № 1.107 – 1 pc.
proxicut saw blades № 1.384(1) – 12 pcs.
proxicut diamond strips (coarse) № 1.385C1 – 12 pcs.
proxicut diamond strips (medium) № 1.385M1 – 12 pcs.
proxicut diamond strips (fine) № 1.385F1 – 12 pcs.
do-all proxicut holder with key № 1.369 – 1 pc.
handle № 1.109 – 1 pc.
shape 1
(small with ledge)
12pcs
height 5 mm
6 pcs.
12 pcs. per plate
16 pcs. per plate
17 pcs. per plate
64 pcs.:
for incisors (upper & lower jaw, small, medium, large) – 44 pcs.
for canines (upper & lower jaw, small, medium, large) – 20 pcs.
64 pcs.:
for premolars (upper & lower jaw, small, medium, large) – 32 pcs.
for molars (upper & lower jaw, small, medium, large) – 32 pcs.
23gX25mm
27G X 30mm (0.4x30mm)
27G X 35mm (0.4x35mm)
30G X 12m (0.3 x 12mm)
30GX16mm (0.3x16mm)
30G X 21mm (0.3x21mm)
30g x25MM (0.3X25mm)
30GX30mm (0.3x30mm)
30GX30mm (0.3x30mm)
